Catalogue de démonstration / Moteurs
TT DC gearbox motor 200RPM 3-6V
Adafruit · MPN 3777 · version lisible par un agent
$2.95indicatif · 2026-08-22
Relevé dans les données structurées de Adafruit à la date indiquée — ce n’est pas un devis. La disponibilité n’est délibérément pas affirmée.
| Adafruit | $2.95 · 2026-08-22 | page produit ↗ |
| The Pi Hut | £2.60 · 2026-08-22 | page produit ↗ |
Fiche technique corroborée Partsgraph (PDF)document propre · compilé à partir des sources ci-dessous
Spécifications — chaque valeur porte son justificatif
Électrique
| Courant continu à vide | 150 mA | page fournisseur“when running it from a bench-top supply At 3VDC we measured 150mA @ 120 RPM no-load, and 1.1 Amps when stalled. At 4.5VDC we” |
| Courant de calage @6V (mesuré) | 1.5 Amps | page fournisseur“en stalled At 6VDC we measured 160mA @ 250 RPM no-load, and 1.5 Amps when stalled. Note that these are very basic motors, and ha” |
| Courant de calage mesuré @3V | 1.1 Amps | page fournisseur“top supply At 3VDC we measured 150mA @ 120 RPM no-load, and 1.1 Amps when stalled. At 4.5VDC we measured 155mA @ 185 RPM no-load” |
| Courant à vide mesuré @4.5V | 155 mA | page fournisseur“M no-load, and 1.1 Amps when stalled. At 4.5VDC we measured 155mA @ 185 RPM no-load, and 1.2 Amps when stalled At 6VDC we mea” |
| Courant de calage mesuré @4.5V | 1.2 Amps | page fournisseur“stalled. At 4.5VDC we measured 155mA @ 185 RPM no-load, and 1.2 Amps when stalled At 6VDC we measured 160mA @ 250 RPM no-load, a” |
| Courant à vide mesuré @6V | 160 mA | page fournisseur“RPM no-load, and 1.2 Amps when stalled At 6VDC we measured 160mA @ 250 RPM no-load, and 1.5 Amps when stalled. Note that the” |
| Tolérance du courant à vide | +/- 10% | page fournisseur“tails Rated Voltage: 3~6V Continuous No-Load Current: 150mA +/- 10% Min. Operating Speed (3V): 90+/- 10% RPM Min. Operating Spe” |
| Section des fils | 28 AWG | page fournisseur“1:48 Body Dimensions: 70 x 22 x 18mm Wires Length: 200mm & 28 AWG Weight: 30.6g Product Weight: 30.6g / 1.1oz Diagram Learn C” |
Performance
| Couple de calage @6V | 0.8 kg.cm | page fournisseur“0+/- 10% RPM Stall Torque (3V): 0.4kg.cm Stall Torque (6V): 0.8kg.cm Gear Ratio: 1:48 Body Dimensions: 70 x 22 x 18mm Wires Leng” |
| Vitesse nominale @6V | 200 RPM | page fournisseur“DC Gearbox Motor - TT Motor - 200RPM - 3 to 6VDC : Adafruit Industries, Unique & fun DIY electro” |
| Vitesse à vide mesurée @3V | 120 RPM | page fournisseur“ning it from a bench-top supply At 3VDC we measured 150mA @ 120 RPM no-load, and 1.1 Amps when stalled. At 4.5VDC we measured 1” |
| Vitesse à vide mesurée @4.5V | 185 RPM | page fournisseur“d, and 1.1 Amps when stalled. At 4.5VDC we measured 155mA @ 185 RPM no-load, and 1.2 Amps when stalled At 6VDC we measured 160m” |
| Vitesse à vide mesurée @6V | 250 RPM | page fournisseur“load, and 1.2 Amps when stalled At 6VDC we measured 160mA @ 250 RPM no-load, and 1.5 Amps when stalled. Note that these are ver” |
| Couple de calage @3V | 0.4 kg.cm | page fournisseur“in. Operating Speed (6V): 200+/- 10% RPM Stall Torque (3V): 0.4kg.cm Stall Torque (6V): 0.8kg.cm Gear Ratio: 1:48 Body Dimension” |
| Vitesse de fonctionnement min @3V (RPM) | 90 | page fournisseur“s No-Load Current: 150mA +/- 10% Min. Operating Speed (3V): 90+/- 10% RPM Min. Operating Speed (6V): 200+/- 10% RPM Stall” |
Interface
| Terminaison des fils | 0.1" male connectors | page fournisseur“and it comes with 2 x 200mm wires with breadboard-friendly 0.1" male connectors. Perfect for plugging into a breadboard or terminal blocks.” |
| Codeur intégré | non | page fournisseur“en stalled. Note that these are very basic motors, and have no built-in encoders, speed control or positional feedback. Voltage goes in, rot” |
| Driver de moteur requis | oui | page fournisseur“drive these directly from a microcontroller, a high-current motor driver is required ! We recommend our DRV8833 motor driver for these motors ,” |
Mécanique
| Dimensions du corps | 70 x 22 x 18mm | page fournisseur“all Torque (6V): 0.8kg.cm Gear Ratio: 1:48 Body Dimensions: 70 x 22 x 18mm Wires Length: 200mm & 28 AWG Weight: 30.6g Product Weight:” |
| Poids | 30.6 g | page fournisseur“nsions: 70 x 22 x 18mm Wires Length: 200mm & 28 AWG Weight: 30.6g Product Weight: 30.6g / 1.1oz Diagram Learn Crickit Lab Sha” |
| Longueur des fils | 200 mm | page fournisseur“box Motor with a gear ratio of 1:48 , and it comes with 2 x 200mm wires with breadboard-friendly 0.1" male connectors. Perfec” |
| Vendu à l’unité | oui | page fournisseur“feedback system is required if you need precision movement. Comes 1 x per order, with just the motor + wires. You cannot drive these direct” |
Général
| Tension de fonctionnement | 3 à 6 V | page fournisseur“DC Gearbox Motor - TT Motor - 200RPM - 3 to 6VDC : Adafruit Industries, Unique & fun DIY electronics and kit” |
| Rapport de réduction | 1:48 | page fournisseur“moving. This is a TT DC Gearbox Motor with a gear ratio of 1:48 , and it comes with 2 x 200mm wires with breadboard-friendl” |
Utilisé dans
Robot explorateur 2 roues motrices — en tant que Moteurs d’entraînement