Catálogo de demostración / Controladores
ESP32-S3 Feather (8MB Flash / 2MB PSRAM)
Adafruit · MPN 5323 · versión legible por agentes
$17.50indicativo · 2026-08-22
Tomado de los propios datos estructurados de Adafruit en la fecha indicada — no es un presupuesto. La disponibilidad no se afirma deliberadamente.
| Adafruit | $17.50 · 2026-08-22 | página del producto ↗ |
Hoja de especificaciones corroborada de Partsgraph (PDF)documento propio · compilado a partir de las fuentes de abajo
ESP32-S3-WROOM-1 datasheetsha256 27d71971da07…
Especificaciones — cada valor lleva su justificante
Eléctrico
| Corriente en reposo profundo | 100 uA | página del proveedor“Low Power friendly ! In deep sleep mode we can get down to ~100uA of current draw from the Lipoly connection. Quiescent curre” |
| Corriente de salida del regulador de 3.3V (min) | 500 mA | página del proveedor“due to parts shortages. The regulator can provide at least 500mA. ESP32-S3 Mini Module Datasheet Learn Primary Guide: Adafru” |
| Circuito monitor de batería | MAX17048 | página del proveedor“y charging when powered over USB-C LiPoly battery monitor - MAX17048 chip actively monitors your battery for voltage and state o” |
Rendimiento
| Frecuencia de la CPU | 240 MHz | página del proveedor“arted with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather i” |
| SRAM | 512 KB | página del proveedor“eather comes with 8 MB flash and no PSRAM, but it does have 512KB of SRAM so its fine for use with CircuitPython support as l” |
| Núcleos de la CPU | Dual Core | página del proveedor“use in ESP-IDF or with Arduino support. Features: ESP32-S3 Dual Core 240MHz Tensilica processor - the next generation of ESP32-S” |
Interfaz
| Conector USB | USB type C | página del proveedor“n and comes with 8 MByte of Flash, no PSRAM Power options - USB type C or Lipoly battery Built-in battery charging when powered ov” |
| Bluetooth | BLE | página del proveedor“) Also include 1 x Lithium Ion Polymer Battery with Short Cable - 3.7V 350mAh ($ 5.95 ) There are multiple versions of this” |
| Conector STEMMA QT / Qwiic | sí | página del proveedor“(optional, for checking the hardware serial debug console) STEMMA QT connector for I2C devices, with switchable power, so you can go into” |
| USB nativo | sí | página del proveedor“pressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. That” |
| Compatibilidad con Bluetooth Classic | no | página del proveedor“arable to ESP32's dual-core. However, there is no Bluetooth Classic support, only Bluetooth LE. This chip is a great step up from the earlier” |
| Botones de reinicio y DFU (BOOT0) | sí | página del proveedor“voltage and state of charge / percentage reporting over I2C Reset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port” |
| NeoPixel de estado con alimentación controlada por pin | sí | página del proveedor“r, so you can go into low power mode. On/Charge/User LEDs + status NeoPixel with pin-controlled power for low power usage Low Power fri” |
| LED de encendido/carga/usuario | sí | página del proveedor“, with switchable power, so you can go into low power mode. On/Charge/User LEDs + status NeoPixel with pin-controlled power for low power u” |
| Alimentación I2C STEMMA QT conmutable | sí | página del proveedor“al debug console) STEMMA QT connector for I2C devices, with switchable power, so you can go into low power mode. On/Charge/User LEDs + s” |
| Pin de salida de depuración serie | sí | página del proveedor“h is a USB serial port so you don't need a separate cable!) Serial debug output pin (optional, for checking the hardware serial debug console)” |
| Frameworks admitidos | ESP-IDF, Arduino or CircuitPython | página del proveedor“I2C power for the lowest quiescent current draw. Works with ESP-IDF, Arduino or CircuitPython (not recommended since there is no PSRAM, but for some simp” |
Mecánico
| Formato | Feather format | página del proveedor“ock Add to Wishlist Description The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful ne” |
Conformidad
| Certificación del módulo | FCC/CE | página del proveedor“yboard/mouse, MIDI device, disk drive, etc! Mini module has FCC/CE certification and comes with 8 MByte of Flash, no PSRAM Pow” |
General
| Módulo | ESP32-S3 | hoja de datos pág. 1“ESP32-S3-WROOM-1 ESP32-S3-WROOM-1U Datasheet Version 1.8 2.4 GHz”https://documentation.espressif.com/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdfsha256 27d71971da07… |
| Wi-Fi | 2.4 GHz | hoja de datos pág. 1“ESP32-S3-WROOM-1 ESP32-S3-WROOM-1U Datasheet Version 1.8 2.4 GHz Wi-Fi (802.11b/g/n) and Bluetooth® 5 module Built around”https://documentation.espressif.com/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdfsha256 27d71971da07… |
| Flash | 8 MB | página del proveedor“Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic [8MB Flash No PSRAM] : Adafruit Industries, Unique & fun DIY ele” |
| PSRAM | 2 MB | página del proveedor“from the options below: 8MB Flash No PSRAM $17.50 4MB Flash 2MB PSRAM Out of stock 8MB Flash with w.FL $17.50 Qty Discount” |
| Cargador LiPo integrado | sí | página del proveedor“wer options - USB type C or Lipoly battery Built-in battery charging when powered over USB-C LiPoly battery monitor - MAX1704” |
Se usa en
Estación meteorológica solar · Riego automático de plantas — como Controlador